 |
News
Industry Dynamic
"made in China 2025" will bring new opportunities for nonferrous metal industry
The non-ferrous metal industry to use "area" strategy to speed up the "going out", aim at "low grade" mining development, expand the application of technical requirements such as non-ferrous metal research, to break the bottleneck of resources and environment constraints.At the same time, try to realize the fusion of cross-industry, coupled with industrial capital and financial capital, reshape the industry value chain system
"At present, the non-ferrous metal industry facing a prominent 'double extrusion, three constraints'.' double extrusion is price couldn't get on, the dual pressure of costs come down. 'the three constraints including excess capacity constraints, constraints, and ecological environmental protection of the technical level of the constraints."China nonferrous metals industry association Chen Quanxun association held in three five council described the current situation of nonferrous metal industry.
Chen Quanxun introduction, copper, aluminum, lead, in 2014 the domestic market prices fell by 7.8%, 6.9% and 7.8% respectively, aluminum prices equivalent to a return to more than 20 years ago.Downturn in the global commodity prices will continue this year the domestic producer prices declining for 36 months in a row, non-ferrous metal products meet the ceiling price.At the same time, capital, labor and resources and environment cost are increase rigidity, "floor" in the increased costs, some companies could also could meet capital chain rupture.
In a row after years of rapid growth, non-ferrous metals industry has entered into a state of running smoothly.In 2014, non-ferrous metals enterprises above designated size industrial added value growth of 11.2%, 2.9% higher than the national industrial growth, the growth rate fell 2% year on year.The non-ferrous metal industry investment growth for 10 years significantly higher than the national average trend has ended.This year, China nonferrous metals industry association is expected, non-ferrous metals industry production, consumption and investment will maintain the growth rate of around 6%.
Dissolve the overcapacity is still a focus in the non-ferrous metals industry this year.Chen Quanxun introduction, since 2013, the electrolytic aluminium production and production capacity of 3.38 million tons, but currently runs about 32 million tons of production capacity, but also a part of the new release capacity, excess pressure is very big.In addition to the smelting capacity, common copper aluminum processing also has a surplus.
"Dissolve excess capacity to be eliminated in a few years ago a group of, integration, on the basis of a batch of accelerate digestion, transfer a batch of."China nonferrous metals industry association vice-chairman concurrently secretary general Jia Mingxing told reporters, on the one hand and sticking to catch to expand application, continue to push forward "to the aluminum steel", "to the aluminum section copper" and "to the aluminum section wood" in the construction field;On the other hand, continue to promote capacity to domestic resources enrichment area, energy transfer.All the way at the same time, with the aid of the implementation of "area" strategy, cooperation with relevant countries to strengthen capacity and resources cooperation, to speed up the pace of non-ferrous metals "go out".
"Made in China 2025" will bring new opportunities for non-ferrous metals industry.Chen Quanxun said, let the non-ferrous metal industry aiming at "low grade" mine development, expand the application of non-ferrous metal technology demand, consistently conduct technical work.A depend on innovation drive, pushing forward the construction of the digital mine, intelligent factory realize intelligent production process;2 it is to develop intelligent products, smart materials, such as integrated circuit, robot, biological medicine industry development support;3 it is relying on Internet technology, the realization of cross-industry integration, especially with the new mode of production, the new business model, coupled with industrial capital and financial capital, reshape the industry value chain system.
The non-ferrous metal industry waste water, waste gas, waste emissions, construction of non-ferrous metals industrial powers, must break through the bottleneck of resources and environmental constraints.Chen Quanxun put forward about it, this year we will continue to do mine, on the basis of green mining, city focus on regional mine construction.Continue to pay special attention to energy conservation and emissions reduction work, further promotion of low temperature and low voltage aluminum electrolytic cell technology, short TongQianXin process smelting technology, and aluminum air power battery development application of cutting-edge technology, etc.In terms of ecological and environmental protection, to develop the heavy metal pollution reduction, poisonous and harmful material substitution, waste recycling and other green technology equipment, active shaping corporate image of green development.
On April 2, (in this article from economic daily)
"At present, the non-ferrous metal industry facing a prominent 'double extrusion, three constraints'.' double extrusion is price couldn't get on, the dual pressure of costs come down. 'the three constraints including excess capacity constraints, constraints, and ecological environmental protection of the technical level of the constraints."China nonferrous metals industry association Chen Quanxun association held in three five council described the current situation of nonferrous metal industry.
Chen Quanxun introduction, copper, aluminum, lead, in 2014 the domestic market prices fell by 7.8%, 6.9% and 7.8% respectively, aluminum prices equivalent to a return to more than 20 years ago.Downturn in the global commodity prices will continue this year the domestic producer prices declining for 36 months in a row, non-ferrous metal products meet the ceiling price.At the same time, capital, labor and resources and environment cost are increase rigidity, "floor" in the increased costs, some companies could also could meet capital chain rupture.
In a row after years of rapid growth, non-ferrous metals industry has entered into a state of running smoothly.In 2014, non-ferrous metals enterprises above designated size industrial added value growth of 11.2%, 2.9% higher than the national industrial growth, the growth rate fell 2% year on year.The non-ferrous metal industry investment growth for 10 years significantly higher than the national average trend has ended.This year, China nonferrous metals industry association is expected, non-ferrous metals industry production, consumption and investment will maintain the growth rate of around 6%.
Dissolve the overcapacity is still a focus in the non-ferrous metals industry this year.Chen Quanxun introduction, since 2013, the electrolytic aluminium production and production capacity of 3.38 million tons, but currently runs about 32 million tons of production capacity, but also a part of the new release capacity, excess pressure is very big.In addition to the smelting capacity, common copper aluminum processing also has a surplus.
"Dissolve excess capacity to be eliminated in a few years ago a group of, integration, on the basis of a batch of accelerate digestion, transfer a batch of."China nonferrous metals industry association vice-chairman concurrently secretary general Jia Mingxing told reporters, on the one hand and sticking to catch to expand application, continue to push forward "to the aluminum steel", "to the aluminum section copper" and "to the aluminum section wood" in the construction field;On the other hand, continue to promote capacity to domestic resources enrichment area, energy transfer.All the way at the same time, with the aid of the implementation of "area" strategy, cooperation with relevant countries to strengthen capacity and resources cooperation, to speed up the pace of non-ferrous metals "go out".
"Made in China 2025" will bring new opportunities for non-ferrous metals industry.Chen Quanxun said, let the non-ferrous metal industry aiming at "low grade" mine development, expand the application of non-ferrous metal technology demand, consistently conduct technical work.A depend on innovation drive, pushing forward the construction of the digital mine, intelligent factory realize intelligent production process;2 it is to develop intelligent products, smart materials, such as integrated circuit, robot, biological medicine industry development support;3 it is relying on Internet technology, the realization of cross-industry integration, especially with the new mode of production, the new business model, coupled with industrial capital and financial capital, reshape the industry value chain system.
The non-ferrous metal industry waste water, waste gas, waste emissions, construction of non-ferrous metals industrial powers, must break through the bottleneck of resources and environmental constraints.Chen Quanxun put forward about it, this year we will continue to do mine, on the basis of green mining, city focus on regional mine construction.Continue to pay special attention to energy conservation and emissions reduction work, further promotion of low temperature and low voltage aluminum electrolytic cell technology, short TongQianXin process smelting technology, and aluminum air power battery development application of cutting-edge technology, etc.In terms of ecological and environmental protection, to develop the heavy metal pollution reduction, poisonous and harmful material substitution, waste recycling and other green technology equipment, active shaping corporate image of green development.
On April 2, (in this article from economic daily)